HEADSETS

S-DCR Headset

S-DCR model is an Integrated headset compatible with DCR system (Deda internal cable routing) that allows the direct cable routing into the topcover. This solution makes any Deda stems fitting a DCR frame, a quick and smart solution for most of bicycle brands. It allows the full integration of the cables ,like the DCR headset, but leaving a portion of the cables visible under the stem. The system works with a standard tapered fork steerer (1-1/8” - 1.5”) and requires a 52mm (1.5”) upper headset bearing od. The special compression ring design leaves room for the cables to fit the gap in between the headset bearing and the fork. The S-DCR headset is also compatible with Deda HSS spacers for a better integration.
In stock
SKU
HDS-DCR
€64,00
VAT not included
Shipment in 48h

Tech Specs

S-DCR headset

  • Headset model:
    Integrated 1.5” - 1.5”
  • Bearings type:
    Angular contact bearing; chrome steel
  • Bearings size:
    Upper 51,9 × 40 × 8 mm
    Lower 51,9 × 40 × 8 mm
  • Contact angle:
    45 - 45
  • Headtube diameter:
    56.0 mm
  • Fork steerer:
    Tapered 1 1/8” (28.6 mm) - 1.5” (38.10 mm)
  • Top cover:
    56 mm
  • Crown race diameter:
    39.8 mm aluminum
  • Stack height:
    16.2 mm
  • Weight:
    90 g
  • SKU:
    HDS-DCR
  • Note:
    Compatible with 4 cables routing; DEDA HSS spacers are recommended for S-DCR headset.